Terahertz Imaging Cameras

Description

TeraSense has developed an original patent-protected technology for making a new generation of semiconductor detector arrays for terahertz imaging. The detectors are fabricated with a GaAs high-mobility heterostructure in the standard semiconductor cycle using conventional optical lithography. The imaging sensor is manufactured on a single wafer. That process ensures high homogeneity and reproducibility of the plasmonic detector parameters (pixel-to-pixel deviation responsivity is within a 20- percent range). Each detector unit has a room-temperature responsivity up to 50 kV/W with read-out circuitry and noise-equivalent power of 1 nW√Hz  in the frequency range 10 GHz – 1 THz. The detection mechanism is based on excitation of plasma oscillations in a two-dimensional electron system with subsequent rectification. The rectification takes place on special defects made in the electron system.

 

The terahertz imaging cameras are active detecting devices, and require an external THz source. TeraSense offers sub-terahertz wave sources based on IMPATT technology. All TERA-series THz imaging cameras employ the same type of detectors with identical capabilities and spatial resolution. The difference between the models lies in the number of pixels in their sensor arrays and their effective imaging area.

 

In addition to the standard THz camera models TeraSense offers customized solutions to satisfy diverse configuration and geometry requirements.

 

Terahertz camera

Tera-256

  • 256 pixels (16 x 16 array)
  • 1.5 mm pixel pitch
  • NEP = 1 nW/√Hz
  • 11.5 cm x 11.5 cm x 4.2 cm device size

 

Terahertz camera

Tera-1024

  • 1024 pixels (32 x 32 array)
  • 1.5 mm pixel pitch
  • NEP = 1 nW/√Hz
  • 11.5 cm x 11.5 cm x 4.2 cm device size

 

Terahertz camera

Tera-4096

  • 4096 pixels (64 x 64 array)
  • 1.5 mm pixel pitch
  • NEP=1 nW/√Hz
  • 16.5 cm x 16.5 cm x 4.5 cm device size

 

Linear Tera-1024

  • 1024 pixels (256 x 4 array)
  • 1.5 x 1.5 mm pixel size
  • NEP = 1 nW/√Hz
  • 44 cm x 4.3 cm x 8.9 cm device size

 

TeraFAST-256

  • Image acquisition rate: 5000 fps (5 KHz)
  • Scanning speed: up to 15 m/sec (900 m/min)
  • Min detectable power/pixel: 100 nW (at 5000 fps)
  • 256 pixels (256 x 1 array) – scalable in size
  • 3 x 1.5 mm pixel size
  • NEP = 1 nW/√Hz

 

 

About TeraSense

 

TeraSense is a manufacturer of low-cost portable sub-terahertz imaging cameras, generators and ultrafast detectors. Our products balance at the cutting edge of scientific and technological breakthroughs. The company is a very strong team of 20 highly skilled scientists and engineers bringing a wealth of experience in the field. TeraSense has a steady growing global outreach supported by a very wide network of authorized distributors available in more than 30 countries of the world.

Datasheets

  • Datasheet 1
  • Datasheet 2

Video